Size Guide
RING SIZE GUIDE :
- Cut a small piece of string or thin strip of paper.
- Wrap it snugly around your finger.
- Use a pen or pencil to mark where the ends overlap.
- Lay it flat and use ruler to measure the length in millimeters.
- Use the chart below to find the corresponding ring size
| US Size | INSIDE DIAMETER (mm) | INSIDE CIRCUMFERENCE (mm) |
| 3 | 14.1 | 44.2 |
| 3.5 | 14.5 | 45.5 |
| 4 | 14.9 | 46.8 |
| 4.5 | 15.3 | 48 |
| 5 | 15.7 | 49.3 |
| 5.5 | 16.1 | 50.6 |
| 6 | 16.5 | 51.9 |
| 6.5 | 16.9 | 53.1 |
| 7 | 17.3 | 54.4 |
| 7.5 | 17.7 | 55.7 |
| 8 | 18.1 | 57 |
| 8.5 | 18.5 | 58.3 |
| 9 | 18.9 | 59.5 |
| 9.5 | 19.4 | 60.8 |
| 10 | 19.7 | 62.1 |
| 10.5 | 20.1 | 63.4 |
| 11 | 20.5 | 64.6 |
| 11.5 | 20.9 | 65.9 |
| 12 | 21.3 | 67.2 |
BRACELET SIZE GUIDE:
- Cut a strip of paper (approximately 0.5 inches wide and long enough to wrap around your wrist)
- Mark the length of the strip at specific points - 6 inches, 6.5 inches, 7 inches, 7.5 inches, and 8 inches. These measurement will serve as reference points for finding you accurate bracelet size.
- Place the strip of paper around your wrist just as you put on a bracelet. Make sure it's comfortably secured without being too tight or too loose.
- Adjust the paper strip to suit your personal preference in terms of how snug or loose you want your bracelet to be.
- Take note of the length indicated by the strip overlapping. If it doesn't overlap at the exact marking point, take note of the nearest point. That point is your bracelet size!
CHAIN & NECKLACE SIZE GUIDE:
- You can refer to this guide for general idea how the length of necklace will look when worn.
- Please note that the length of a necklace may appear differently based on individual preferences and neck sizes.
